Electrical specifications
Type
Whip antenna (λ/4) and GNSS Base Kit
Frequency
144 ‐ 174 MHz, 1575.42 MHz (External Antenna Whips, GNSS)
Bandwidth
3% of f.res (VSWR ≤ 1.5:1)
V.S.W.R
≤ 1.3:1 @ f.res
Impedance
50 Ohm
Polarisation
Linear (VHF), RHC (Right Hand Circular)(GNSS)
Gain
3 dBd, 5.15 dBi (VHF)
Satellite System
GPS and Galileo
LNA Gain
26 dB (GNSS)
Noise Figure
1.8 dB (GNSS)
Supply Voltage
2.7 - 5.5 VDC
Current Consumption, Average
12 mA @ 2.7 VDC
27 mA @ 5.5 VDC
Max. Input Power
150 W (VHF)
Mechanical specifications
Color
Black
Dimensions
600 x 70 x 50 mm
Weight
450 g
Mounting Place
Vehicle roof (Metalic surface)
Mounting Hole
Ø 19.0 mm
Mounting Instructions
Antenna Whip must be cut to specified frequency. See cutting diagram.
Build-in Depth
Approx. 4 mm
Materials
Black Polamyde, PCB, Black chromed SS
Operating Temperature
-40 to + 70°C
Connector
Antenna Whip: UNF 5/16-24
Base: See "ORDERING INFO" (other types available)
Cable
See "ORDERING INFO"
Ingress Protection
IP65 (When mounted)
Serial No.
On product label
Ordering information
GPS-2
WGPS-2 (λ/4 whip) + BA-GPS (5.0 m RG-58 BNC(m) (VHF), 5.0 m RG-174 SMA(m) (GNSS))
GPS-2R
WGPS-2 (λ/4 whip with adjustable tilt) + BA-GPS (5.0 m RG-58 BNC(m) (VHF), 5.0 m RG-174 SMA(m) (GNSS))
GPS-2M
WGPS-2 (λ/4 whip with a conical spring) + BA-GPS (5.0 m RG-58 BNC(m) (VHF), 5.0 m RG-174 SMA(m) (GNSS))
Packaging information
Type
Bag
Disclaimer
Here you find all products for a complete antenna system. One-stop supplier with focus on high quality products produced in EU. No matter which type of antenna you are searching for, you will find it here.
Every effort has been made to ensure the accuracy of the information in this product sheet. Scan Antenna reserves the right to introduce changes to this information without notice.
All rights reserved.